LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Lighting System - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Daytime Running Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Example 1

  1. Ignition - On / Vehicle - In Service Mode
  2. Perform the scan tool control function:Park Lamps/Daytime Running Lamps-Left = On/Off - Verify the component turns On and Off:
    • If the component does not turn On and Off 

      Refer to:DTC P0106

  3. Perform the scan tool control function:Park Lamps/Daytime Running Lamps-Right = On/Off - Verify the component turns On and Off:
    • If the component does not turn On and Off 
    1. Refer to:Daytime Running Lamps = Malfunction
    • If the component turns On and Off 
  4. Refer to:Ambient Light Sensor = Malfunction