LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Lighting System - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC B255F >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Perform the scan tool control function:Accent Lighting 1 - On and Off

    Verify the component turns On and Off:

    • A98 Front Overhead Console Assembly
    • E1G Accent Lamp - Left Instrument Panel
    • E38 Flood Lamp - Center Console
    • E55D Flood Lamp - Driver Door Pocket
    • E55P Flood Lamp - Passenger Door Pocket
    • E63D Flood Lamp - Driver Door Handle
    • E63P Flood Lamp - Passenger Door Handle
    • E63LR Flood Lamp - Left Rear Door Handle
    • E63RR Flood Lamp - Right Rear Door Handle
    • If the component does not turn On and Off 

      Refer to: Circuit/System Testing

    • Go to next step: If the component turns On and Off 
  3. All OK.
scientia non olet · About LEMON Manuals