LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Ignition Mode Switch Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON/Vehicle ON.
  2. Verify the green LED turns ON and OFF when commanding the Run/Start Power Mode Indicator On and Off with the scan tool.
    • If the green LED does not turn ON and OFF 

      Refer to Circuit/System Testing - Green LED Test.

    • Go to next step: If the green LED turns ON and OFF 
  3. Verify the amber LED turns ON and OFF when commanding the Accessory Power Mode Indicator On and Off with the scan tool.
    • If the amber LED does not turn ON and OFF 

      Refer to Circuit/System Testing - Amber LED Test.

    • Go to next step: If the amber LED turns ON and OFF 
  4. All OK.
scientia non olet · About LEMON Manuals