Tire Rotation
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Rotate the tires and wheels at frequent intervals, as specified in the maintenance schedule, to equalize wear. Maintenance Schedule In addition to scheduled rotation, rotate the tires and wheels whenever uneven tire wear is noticed.
Radial tires tend to wear faster in the shoulder area, particularly in front positions. Radial tires in non-drive locations may develop an irregular wear pattern that may increase tire noise. This makes regular rotation especially necessary.
Removal
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove all four tire and wheel assemblies noting their original position on the vehicle. Tire and Wheel Removal and Installation
- Inspect the tires and the wheels for damage and debris.
Installation
Noting the original mounting position of the tire and wheel assemblies (1), install the tire and wheel assemblies (1) in the new position as shown above. Tire and Wheel Removal and Installation
- Check and adjust the tire pressure of all four wheel and tire assemblies (1) to specification as indicated by the tire placard.
- Remove the support and lower the vehicle.
- Perform the tire pressure indicator sensor learn procedure. Tire Pressure Indicator Sensor Learn