K29R Seat Heating Control Module - Rear X2 (KA6)
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| - |
Connector Part Information
- Harness Type: Rear Seat Heating Control Module
- OEM Connector: Not Available
- Service Connector: Service by Harness - See Part Catalog
- Description: 8-Way
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
Service Terminal |
Tray Name |
Core Crimp |
Insulation Crimp |
| I |
Not Required |
No Tool Required |
No Tool Required |
Not Required |
Not Required |
Not Required |
Not Required |
| Pin |
Size |
Color |
Circuit |
Function |
Terminal Type ID |
Option |
| 1 |
0.35 |
BU/WH |
7048 |
Left Rear Cushion NTC Low Reference |
I |
- |
| 2 |
0.35 |
WH/BK |
7054 |
Right Rear Cushion NTC Low Reference |
I |
- |
| 5 |
0.35 |
YE/WH |
7053 |
Right Rear Cushion NTC Signal |
I |
- |
| 6 |
0.35 |
WH/BU |
7047 |
Left Rear Cushion NTC Signal |
I |
- |
| 7 |
0.35 |
BK |
2050 |
Ground |
I |
- |
| 8 |
0.35 |
GN/BU |
6133 |
Local Interconnect Network Serial Data Bus 2 |
I |
- |