Front Parking Assist Alarm Sensor Bracket Replacement: Notes

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Removal Procedure

Front Bumper Fascia - Remove Front Bumper Fascia Replacement .
Courtesy of GENERAL MOTORS COMPANY

Disconnect and reposition harness as necessary.
Remove the sensor (1) from the sensor bracket.
Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed tool carefully remove the bracket (1) from the fascia.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Do Not sand off alignment tabs / outline.

Using an appropriate tool sand/grind sonic weld plastic residue (1) from the fascia.