Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Reposition the appropriate front wheelhouse liner:
- For left side refer to Front Wheelhouse Liner Replacement - Left Side .
- For right side refer to Front Wheelhouse Liner Replacement - Right Side (LFV, LTG)Front Wheelhouse Liner Replacement - Right Side (LKN) .
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.
Lift the locking tabs on the housing and remove the object sensor (1).
Disconnect the electrical connector.