LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Parking Assistance Systems) >> Diagnostic Information and Procedures >> DTC B0967 or B0968 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Operate the component:Parking Assist Switch - Cycle On and Off

    Verify the scan tool parameter:Parking Assist Switch = Active/Inactive - The value should change when selecting the different switch positions.

    • If not the specified values 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified values 
  3. All OK.