Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Place a suitable container under the left front wheel drive shaft seal.
- Right Front Wheel Drive Shaft - Remove - Front Wheel Drive Half Shaft Replacement - Right Side (LFV)
Right Front Wheel Drive Shaft (1) - Remove and DISCARD - Use the special tool: DT-23129 Universal Seal Remover and GE-6125-1B Slide Hammer