LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Automatic Transmission - 9T50 (M3E) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Strut Replacement (Rear) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle .
  2. Using a suitable jack stand, support the rear of the transmission.
  3. GM4487992Courtesy of GENERAL MOTORS COMPANY

    Remove and DISCARD the rear transmission mount strut bracket to rear mount strut through bolt (1).

  4. Remove and DISCARD the 4 rear transmission mount strut bracket to transmission bolts (2).
  5. Remove the rear transmission mount strut bracket (3).
  6. Remove and DISCARD the rear mount strut to body bolt (4).
  7. Remove the rear mount strut (5) from the vehicle.
scientia non olet · About LEMON Manuals