LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Automatic Transmission - 9T50 (M3E) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Strut Bracket Replacement (Rear) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle .
  2. Using a suitable jack stand, support the rear of the transmission.
  3. GM4487992Courtesy of GENERAL MOTORS COMPANY

    Remove and DISCARD the rear transmission mount bracket to rear mount through bolt (1).

  4. Remove and DISCARD the 4 rear transmission mount bracket to transmission bolts (2).
  5. Remove the rear transmission mount bracket (3).
scientia non olet · About LEMON Manuals