LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Automatic Transmission - 9T50 (M3E) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement (Left Side) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the transmission using a suitable jack.
  2. Remove the battery tray. Battery Tray Replacement (LTG)
  3. Remove the Engine Wiring Harness Fuse Block Bracket. Engine Wiring Harness Fuse Block Bracket Replacement
  4. GM4940174Courtesy of GENERAL MOTORS COMPANY

    Engine Mount Brace Bolt (1) - Remove [2x]

  5. Remove the transmission mount bracket (2)from the vehicle.
  6. Transmission Mount Transmission Side Bolt (3) - Remove and DISCARD [4x]
  7. Transmission Mount Bolt (4) - Remove [2x]
  8. Remove the transmission mount (5) from the vehicle.
scientia non olet · About LEMON Manuals