Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the vehicle.
- Remove the left front wheel and tire assembly. Tire and Wheel Removal and Installation
Remove the fluid filler plug (1) from the transmission.
- Fill the transmission to the proper level with the correct fluid. Transmission Fluid Level and Condition Check , and Adhesives, Fluids, Lubricants, and Sealers .
- CAUTION:
Refer to Component Fastener Tightening Caution .
Install the fluid filler plug (1) to the transmission and tighten to 40 N.m (30 lb ft).
- Install the left front wheel and tire assembly. Tire and Wheel Removal and Installation