LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4943220Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Filler Pipe (6) - Install

  2. CAUTION:

    Refer to Fastener Caution .

  3. Fuel Tank Filler Pipe Bolt (5) - Install and tighten 9 N.m (80 lb in)
  4. Fuel Tank Vent Pipe (4) - Connect - Plastic Collar Quick Connect Fitting Service 
  5. Evaporative Emission Canister Filter Pipe (3) - Connect - Plastic Collar Quick Connect Fitting Service 
  6. Fuel Tank Filler Hose (2) - Install
  7. Fuel Tank Filler Hose Clamp (1) - Install and tighten 4 N.m (35 lb in)
  8. GM4590073Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Filler Pipe Nut (2) - Install and tighten 9 N.m (80 lb in)

  9. Fuel Tank Filler Pipe Bolt (1) - Install and tighten 9 N.m (80 lb in)
  10. Rear Wheelhouse Liner - Install - Rear Wheelhouse Liner Replacement
  11. Fuel Tank Filler Pipe Housing - Install - Fuel Tank Filler Pipe Housing Replacement