Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fuel Feed Front Pipe (2) - Install
- Fuel Feed Front Pipe (2) - Connect - Metal Collar Quick Connect Fitting Service
- Fuel Feed Front Pipe Bolt (1) - Install 9 N.m (80 lb in)
Engine Coolant Air Bleed Hose Bracket (2) - Install
- Engine Coolant Air Bleed Hose Bolt (1) - Install 10 N.m (89 lb in)
- Connect the engine wiring harness to the engine coolant air bleed hosebracket.
- Engine Coolant Air Bleed Hose - LTG Engine Coolant Air Bleed Pipe to Radiator Surge Tank - Install - Engine Coolant Air Bleed Hose Replacement (LTG) , or Engine Coolant Air Bleed Hose Replacement (LTG Engine Coolant Air Bleed Pipe to Radiator Surge Tank)
- Intake Manifold Cover - Install - Intake Manifold Cover Replacement