Camshaft Position Actuator Exhaust Solenoid Valve Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement Disconnect the electrical connector.
1	Camshaft Position Actuator Exhaust Solenoid Valve Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Position Actuator Exhaust Solenoid Valve Procedure If reusing the OLD solenoid valve, install a NEW seal. NOTE: A NEW solenoid valve will come with a NEW seal.

Callout

Component Name

Preliminary Procedures

Intake Manifold Cover Replacement
Disconnect the electrical connector.

Camshaft Position Actuator Exhaust Solenoid Valve Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Camshaft Position Actuator Exhaust Solenoid Valve
Procedure
If reusing the OLD solenoid valve, install a NEW seal.

NOTE:

A NEW solenoid valve will come with a NEW seal.