Throttle Body Assembly Replacement
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Air Cleaner Outlet Duct Replacement |
|
| 1 | Electrical Connector |
| 2 | Throttle Body Bolt [4x]
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 3 | Throttle Body Procedure Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset
NOTE:
Clean any debris prior to removing the throttle body. Cover any openings to prevent debris from entering into the intake manifold. |
| 4 | Throttle Body Gasket Procedure Install a NEW throttle body gasket. |