Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Knock Sensor (3) - Install
- Knock Sensor Bolt (2) - Install and tighten 22 N.m (16 lb ft)
- Electrical Connector (1) - Connect
Intake Manifold Brace (1) - Install
- Intake Manifold Brace Bolt (2) - Install and tighten [2x] 10 N.m (89 lb in)
- Exhaust Front Pipe - Install - Exhaust Front Pipe Replacement (LKN)
CAUTION:
Refer to Fastener Caution .