LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls And Fuel - 1.8L (LKN) - Repair Instructions) >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Intake Manifold Cover - Remove - Intake Manifold Cover Replacement
  2. Battery Negative Cable - Disconnect - Battery Negative Cable Disconnection and Connection (HP4)
  3. GM4339744Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Mark the ignition coil electrical connectors for proper installation.

    Ignition Coil Electrical Connector (1) - Disconnect [4x]

  4. GM4339753Courtesy of GENERAL MOTORS COMPANY

    Ignition Coil Bolt (1) - Remove [4x]

  5. Ignition Coil (2) - Remove [4x]