Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Install the fuel injection pump sound insulator (1).
Connect the electrical connector (1).
- Connect the evaporative emission front pipe to the evaporative emission canister purge solenoid valve and fuel feed evaporative emission separator pipe clip. Evaporative Emission Front Pipe Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9) , or Battery Negative Cable Disconnection and Connection (With KL9)