LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls And Fuel - 1.8L (LKN) - Repair Instructions) >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4332372Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Unclip [2x]

  2. GM4332375Courtesy of GENERAL MOTORS COMPANY

    Exhaust Gas Recirculation Cooler Temperature Sensor Bracket Bolt (1) - Remove

  3. Exhaust Gas Recirculation Cooler Temperature Sensor Bracket (2) - Remove
scientia non olet · About LEMON Manuals