LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls And Fuel - 1.8L (LKN) - Repair Instructions) >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4332375Courtesy of GENERAL MOTORS COMPANY

    Exhaust Gas Recirculation Cooler Temperature Sensor Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Exhaust Gas Recirculation Cooler Temperature Sensor Bracket Bolt (1) - Install and tighten 10 N.m (89 lb in)
  3. GM4332372Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Install [2x]

scientia non olet · About LEMON Manuals