Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Exhaust Gas Recirculation Cooler Outlet Pipe Gasket (1) - Install
- CAUTION:
Refer to Fastener Caution .
Exhaust Gas Recirculation Cooler Outlet Pipe Bolt (1) - Install and tighten [2x] 10 N.m (89 lb in)
Exhaust Gas Recirculation Pipe Bolt (1) - Install and tighten 10 N.m (89 lb in)
Exhaust Gas Recirculation Cooler Outlet Pipe Bolt (1) - Install and tighten [2x] 10 N.m (89 lb in)
- Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement
- Exhaust Gas Recirculation Cooler Temperature Sensor- Position 2 - Install - Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2
- Water Outlet - Install - Water Outlet Replacement (LKN)