Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Exhaust Gas Recirculation Cooler Inlet Pipe Gasket (3) - Install
- Exhaust Gas Recirculation Cooler Inlet Pipe (2) - Install
- Exhaust Gas Recirculation Cooler Inlet Pipe Bolt (1) - Install and tighten [2x] 10 N.m (89 lb in)
Retainer (1) - Install
- Fill the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
CAUTION:
Refer to Fastener Caution .