Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Intake Manifold Cover - Remove - Intake Manifold Cover Replacement
- Drain the cooling system. Cooling System Draining and Filling (GE-47716) , or Cooling System Draining and Filling (Static)
Engine Coolant Air Bleed Hose (3) @ Water Outlet - Disconnect - Engine Coolant Air Bleed Hose Replacement (LKN Radiator Surge Tank to Water Outlet to Exhaust Gas Recirculation Cooler Outlet Pipe)
Disconnect the automatic transmission range selector lever cable (1) from the automatic transmission range selector lever cable lever and automatic transmission range selector lever cable bracket (2). Range Selector Lever Cable Replacement
Electrical Connector (1) - Disconnect
Engine Coolant Temperature Sensor Retainer (1) - Unclip
- Engine Coolant Temperature Sensor (2) - Remove
- Engine Coolant Temperature Sensor Seal (3) - Inspect the seal and replace if necessary.
NOTE:
The seal is reusable, inspect the seal and replace if damaged.