Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Set the park brake and chock the wheels.
Intake Manifold Cover - Remove - Intake Manifold Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift lever pin.
Press the locking tabs inward in order to release the transmission range selector lever cable (2) from the cable bracket.
Transmission Range Selector Lever Cable (2) - Reposition away
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) @ Camshaft Position Sensor (2) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Camshaft Position Sensor Bolt (1) - Remove

NOTE:

Inspect the O-ring and replace if necessary.

Camshaft Position Sensor (2) - Remove