Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Intake Manifold Cover - Remove - Intake Manifold Cover Replacement
Electrical Connector (1) @ Camshaft Position Actuator Solenoid Valve (2) - Disconnect
Camshaft Position Actuator Solenoid Valve Bolt (1) - Remove
- Camshaft Position Actuator Solenoid Valve (2) - Remove
NOTE:
Inspect the camshaft position actuator solenoid valve o-ring and replace as necessary.