Turbocharger Air Pressure Sensor Replacement
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Front Bumper Fascia Replacement |
|
| 1 | Electrical Connector |
| 2 | Turbocharger Inlet Absolute Pressure Sensor Bolt
CAUTION:
Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in) |
| 3 | Turbocharger Inlet Absolute Pressure Sensor Procedure Perform the intake system learned values reset. Intake System Learned Values Reset |
| 4 | Turbocharger Inlet Absolute Pressure Sensor Seal Procedure Install a NEW O-ring seal. |