Throttle Body Assembly Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement Charge Air Cooler Outlet Air Tube Replacement
1	Throttle Body Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Throttle Body Procedure Disconnect the electrical connector. Remove and DISCARD the gasket. Perform the intake system learned values reset. Intake System Learned Values Reset Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset

Callout

Component Name

Preliminary Procedures

Intake Manifold Cover Replacement
Charge Air Cooler Outlet Air Tube Replacement

Throttle Body Bolt [4x]

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Throttle Body

Procedure

Disconnect the electrical connector.
Remove and DISCARD the gasket.
Perform the intake system learned values reset. Intake System Learned Values Reset
Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset