Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel Injection Fuel Rail Assembly - Remove - Fuel Injection Fuel Rail Assembly Replacement
Disconnect the fuel injector wiring harness connector (1) from the fuel injection fuel rail fuel pressure sensor.
- Cut the fuel injector wiring harness tie strap (2) and DISCARD.
- Unclip the fuel injector wiring harness (3) from the fuel injection fuel rail.
Cut the remaining fuel injector wiring harness tie straps (1) and DISCARD.
- Disconnect the fuel injector wiring harness connectors (2) from the fuel injectors (3).