Camshaft Position Actuator Solenoid Valve Replacement - Exhaust

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Intake Manifold Cover Replacement
1	Camshaft Position Actuator Solenoid Valve Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Position Actuator Solenoid Valve Procedure Disconnect the electrical connector. Install a NEW seal if reinstalling the solenoid valve.

Callout

Component Name

Preliminary Procedure
Intake Manifold Cover Replacement

Camshaft Position Actuator Solenoid Valve Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Camshaft Position Actuator Solenoid Valve

Procedure

Disconnect the electrical connector.
Install a NEW seal if reinstalling the solenoid valve.