LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Disc Brake System) >> Repair Instructions >> Rear Brake Caliper Replacement (With J71) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rear Parking Brake Actuator Replacement - Remove
  2. Raise and support the vehicle. Lifting and Jacking the Vehicle
  3. Tire and Wheel Removal and Installation - Remove
  4. GM4231232Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Fitting Bolt (1) - Remove

  5. GM4231237Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do NOT reuse the brake hose fitting gaskets.

    Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Remove and DISCARD [2x]

  6. Cap the brake hose fitting to prevent brake fluid loss and contamination.
  7. GM4244400Courtesy of GENERAL MOTORS COMPANY

    Brake Caliper Guide Pin Bolt (1) - Remove [2x]

  8. GM4231221Courtesy of GENERAL MOTORS COMPANY

    Brake Caliper (1) - Remove