Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Brake Caliper (1) - Install
- CAUTION:
Brake Caliper Guide Pin Bolt (1) - Install and tighten40 N.m (30 lb ft) [2x]
- NOTE:
Install NEW brake hose fitting gaskets.
Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Install [2x]
Brake Hose Fitting Bolt (1) - Install and tighten 40 N.m (30 lb ft)
- Bleed the brake system. Hydraulic Brake System Bleeding (Pressure)Hydraulic Brake System Bleeding (Manual)
- Tire and Wheel Removal and Installation - Install