Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Caliper Guide Pin Seal (1) - Install [2x]
Apply a thin coat of high-temperature silicone brake lubricant to the caliper guide pins.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The lower caliper guide pin is equipped with a bushing and must be installed in the same location.

Caliper Lower Guide Pin (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Caliper Upper Guide Pin (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Brake Caliper (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Caliper Guide Pin Bolt (1) - Install and tighten 40 N.m (30 lb ft) [2x]
Tire and Wheel Removal and Installation - Install