LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Tire Pressure Monitoring System) >> Diagnostic Information and Procedures >> DTC C0569 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Program the control module:K9 Body Control Module
  3. Program - Tire Type/Pressure Selection - With Scan ToolRefer to:Vehicle Certification, Tire Placard, and Anti-Theft Label
  4. Ignition Off - Ignition - On / Vehicle - In Service Mode
  5. Verify DTC C0569 is not set.
    • If the DTC is set 

      Replace the component:K9 Body Control Module

    • Go to next step: If the DTC is not set 
  6. All OK.