Fastener Specifications

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Single Use Non-Threaded Fasteners/Components

NOTE: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
Application
Brake Hose Fitting Gasket
Brake Master Cylinder Reservoir Retaining Pin
Brake Master Cylinder Reservoir Seal
Brake Master Cylinder Seal - Without HP4
Retainer - Brake Pedal

Single Use Threaded Fastener/Component Tightening Specifications

NOTE: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
Application	Specification
Application	Metric (English)
Brake Master Cylinder Reservoir Bolt	7 N.m (62 lb in)
Master Cylinder Nut	55 N.m (41 lb ft)

Reusable Threaded Fastener Tightening Specifications

NOTE: All fasteners listed in this table can be reused after removal.
Application	Specification
Application	Metric (English)
Brake and Accelerator Pedal Assembly Bolt	9 N.m (80 lb in)
Brake and Accelerator Pedal Assembly Nut	9 N.m (80 lb in)
Brake Hose Bracket Bolt	9 N.m (80 lb in)
Brake Hose Fitting Bolt - Front and Rear	40 N.m (30 lb ft)
Brake Master Cylinder Bolt	22 N.m (16 lb ft)
Brake Master Cylinder Bracket Bolt	22 N.m (16 lb ft)
Brake Master Cylinder Hose Brake Pipe Fitting	32 N.m (24 lb ft)
Brake Pipe Fitting	18 N.m (13 lb ft)
Brake Pipe Fitting - Left Front, Left Rear, Right Front, Right Rear	18 N.m (13 lb ft)
Brake Pressure Modulator Valve Primary Pipe Fitting	32 N.m (24 lb ft)
Brake Pressure Modulator Valve Secondary Pipe Fitting	32 N.m (24 lb ft)
Master Cylinder Primary Brake Pipe Fitting	32 N.m (24 lb ft)
Master Cylinder Secondary Brake Pipe Fitting	32 N.m (24 lb ft)
Power Brake Booster Bolt - With HP4	22 N.m (16 lb ft)
Power Brake Booster Bolt - Without HP4	19 N.m (14 lb ft)