Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Compress the brake pedal retainer (1) locking tabs.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Pull the brake pedal rearward to disconnect the retainer.

Brake Pedal (1) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) - Remove and DISCARD
Brake Master Cylinder Replacement (Without HP4) , or Brake Master Cylinder Replacement (With HP4) - Remove
Electronic Traction Control Brake Pressure Modulator Valve Replacement - Remove
Courtesy of GENERAL MOTORS COMPANY

Power Brake Booster Vacuum PipeFitting (1) @Power Brake Booster Vacuum Sensor - Disconnect
Power Brake Booster Vacuum SensorElectrical Connector - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Power Brake Booster Vacuum Sensor (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Power Brake Booster Bolt (1) - Loosen [2x]
Courtesy of GENERAL MOTORS COMPANY

Power Brake Booster (1) - Remove