Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate the master cylinder reservoir seals with GM approved brake fluid from a clean, sealed, brake fluid container.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Ensure the seals are fully seated in the master cylinder.

Brake Master Cylinder Reservoir Seal (1) - Install NEW [2x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Ensure the master cylinder reservoir is fully seated in the master cylinder.

Master Cylinder Reservoir (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Brake Master Cylinder Reservoir Retaining Pin (1) - Install NEW
Brake Master Cylinder - Install - Brake Master Cylinder Replacement (Without HP4) , or Brake Master Cylinder Replacement (With HP4)