Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the drive motor generator power inverter module cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
Generator Control Module Coolant Pump Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Drive Motor Generator Control Module Coolant Pump Hose (2) @ Generator Control Module Coolant Pump (5) - Remove
- Generator Control Module Coolant Pump Hose Clamp (3) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Drive Motor Generator Power Inverter Module Pump Cooling Inlet Hose (4) @ Generator Control Module Coolant Pump (5) - Remove
Generator Control Module Coolant Pump Bracket Bolt (1) - Remove [2x]
- Disconnect the electrical connector. (2)
Generator Control Module Coolant Pump (1) - Remove