Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the drive motor generator power inverter module cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
Front Bumper Fascia (4) - Remove - Front Bumper Fascia Replacement
Generator Control Module Coolant Pump Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Drive Motor Generator Power Inverter Module Pump Cooling Inlet Hose (3) @ Auxiliary Radiator (2) - Remove
Drive Motor Generator Battery Bracket (3) - Remove - Drive Motor Generator Battery Bracket Replacement (Drive Motor Generator Battery Cooling Blower) , or Drive Motor Generator Battery Bracket Replacement (Drive Motor Battery Radiator Surge Tank)
Generator Control Module Coolant Pump Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Drive Motor Generator Power Inverter Module Pump Cooling Inlet Hose (2) @ Drive Motor Power Inverter Module Coolant Pipe (3) - Remove
Drive Motor Generator Power Inverter Module Pump Cooling Inlet Hose (1) - Remove