Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Drive Motor Generator Power Inverter Module Pump Cooling Inlet Hose (1) - Install
Drive Motor Generator Power Inverter Module Pump Cooling Inlet Hose (2) @ Drive Motor Power Inverter Module Coolant Pipe (3) - Install
- Generator Control Module Coolant Pump Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
Drive Motor Generator Battery Bracket (3) - Install - Drive Motor Generator Battery Bracket Replacement (Drive Motor Generator Battery Cooling Blower) , or Drive Motor Generator Battery Bracket Replacement (Drive Motor Battery Radiator Surge Tank)
Drive Motor Generator Power Inverter Module Pump Cooling Inlet Hose (3) @ Auxiliary Radiator (2) - Install
- Generator Control Module Coolant Pump Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
Front Bumper Fascia (4) - Install - Front Bumper Fascia Replacement
- Fill the drive motor generator power inverter module cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
- Inspect for coolant leaks.