Draining Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Turn Vehicle Power Off and remove all keyless entry transmitters from the vehicle and secure in a place outside the vehicle.
- Place a drain pan under the vehicle.
Remove the drive motor generator control module coolant pump hose (4) from the generator control module coolant pump (5).
- Allow the coolant to completely drain from the system.
- Install the drive motor generator control module coolant pump hose (4) to the generator control module coolant pump (5).
- Remove the drain pan.