LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Hybrid/EV System Heating And Cooling) >> Repair Instructions >> Drive Motor Generator Control Module Coolant Pump Hose Replacement (Pump to Aux Radiator) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the drive motor generator power inverter module cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling 
  2. GM4215588Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia (4) - Remove - Front Bumper Fascia Replacement

  3. GM4322996Courtesy of GENERAL MOTORS COMPANY

    Generator Control Module Coolant Pump Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type

  4. Drive Motor Generator Control Module Coolant Pump Hose (2) @ Auxiliary Radiator (3) - Remove
  5. GM4322997Courtesy of GENERAL MOTORS COMPANY

    Generator Control Module Coolant Pump Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type

  6. Generator Control Module Coolant Pipe Clip (3) @ Engine Coolant Fan Shroud (2) Disengage
  7. Drive Motor Generator Control Module Coolant Pump Hose (4) @ Generator Control Module Coolant Pump (5) - Remove
  8. GM4322998Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Generator Control Module Coolant Pump Hose (1) - Remove