LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Hybrid/EV System Heating And Cooling) >> Diagnostic Information and Procedures >> DTC P3064 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine
  2. Verify the scan tool hybrid/EV powertrain control module 2 parameter Exhaust Heat Exchanger Exhaust Bypass Valve Position Learn Status indicates Learned within 2 minutes of engine start.
    • The scan tool parameter does not display Learned 

      Refer to Circuit/System Testing.

    • Go to next step: The scan tool parameter displays Learned 
  3. All OK.