LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Hybrid/EV System Heating And Cooling) >> Diagnostic Information and Procedures >> DTC P19FA-P19FC >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Vehicle On.
  2. Verify the hybrid/EV powertrain control module 2 parameters listed below when commanding the hybrid/EV electronics coolant pump between 20% and 90% with a scan tool.
    • Hybrid/EV Electronics Coolant Pump Command to be 10% or greater.
    • Hybrid/EV Electronics Coolant Pump Feedback to be 50% +/-5%.
    • Hybrid/EV Electronics Coolant Pump Speed is greater than 500 RPM and follows commanded speed accordingly.
    • The scan tool parameters listed are not within the specified ranges 

      Refer to Circuit/System Testing.

    • Go to next step: The scan tool parameters listed are within the specified ranges 
  3. All OK.