Component Testing
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle OFF, disconnect the harness connector at the B202 Hybrid/EV Electronics Coolant Temperature Sensor.
- Test for 2 - 2.5k Ω at approximately 21.11°C (70°F) between the signal terminal and the low reference terminal. Refer to Temperature Versus Resistance for Hybrid/EV Electronics Coolant Temperature Sensor.
- If not within the specified range
Replace the B202 Hybrid/EV Electronics Coolant Temperature Sensor.
- Go to next step: If within the specified range
- If not within the specified range
- All OK.