LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower Oil Pan Replacement  - Remove
  2. GM4244683Courtesy of GENERAL MOTORS COMPANY

    Disconnect the oil level sensor electrical connector (1).

  3. Remove the engine oil level sensor fasteners (2).
  4. GM4244692Courtesy of GENERAL MOTORS COMPANY

    Remove the engine oil level sensor C-clip (1).

  5. Push the sensor connector (2) through the oil pan to remove.
  6. GM4244703Courtesy of GENERAL MOTORS COMPANY

    Remove the engine oil level sensor (1) from the oil pan.