Camshaft Cover Heat Shield Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement Turbocharger Heat Shield Replacement Disconnect and reposition the engine wiring harness.
1	Camshaft Cover Heat Shield Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Cover Heat Shield Procedure Disconnect the camshaft position actuator solenoid valve. NOTE: When removing the camshaft cover heat shield, carefully guide the shield past the turbocharger coolant return and PCV pipes.

Callout

Component Name

Preliminary Procedures

Intake Manifold Cover Replacement
Turbocharger Heat Shield Replacement
Disconnect and reposition the engine wiring harness.

Camshaft Cover Heat Shield Bolt [4x]

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Camshaft Cover Heat Shield
Procedure
Disconnect the camshaft position actuator solenoid valve.

NOTE:

When removing the camshaft cover heat shield, carefully guide the shield past the turbocharger coolant return and PCV pipes.