LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - On Vehicle >> Balancer Shaft with Oil Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil pump. Balancer Shaft with Oil Pump Assemble 
  2. GM4176256Courtesy of GENERAL MOTORS COMPANY

    Balancer Shaft with Oil Pump (2) - Install

  3. Balancer Shaft with Oil Pump Bolt (1) - Loosely install [8x]
  4. GM4176261Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Balancer Shaft with Oil Pump Bolt - Tighten in sequence [8x]

    Tighten

    1. First pass  58 N.m (43 lb ft)
    2. Final pass  58 N.m (43 lb ft)
  5. Timing Chain Crankshaft Sprocket Replacement  - Install
  6. Oil Pan Replacement  - Install
scientia non olet · About LEMON Manuals