Engine Front Cover Removal
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Remove the accessory drive belt tensioner bolt (1).
- Remove the accessory drive belt tensioner (2).
Remove the engine front cover bolts (2 - 7, 9).
- Discard bolts 3, 5, and 6.
- Remove the engine front cover (1).
- Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
- Clean and Inspect the engine front cover mating surface.
- Remove the front oil seal (8) with an appropriate tool.